|
Product Details:
Payment & Shipping Terms:
|
Manufacturer: | Pepperl+Fuchs | Product Type: | Termination Board |
---|---|---|---|
Product No: | FI-PFH-NS0137-R HART | Load Resistor: | 220 Ω |
Control Elements: | DIP Switch | Shock Resistance: | 15 G , 11 Ms |
Weight: | 0.4 Kg | Shipping Weight: | 1.5 Kg |
High Light: | IP20 HART Termination Board,FI-PFH-NS0137-R HART Termination Board,PVC Housing HART Termination Board |
Manufacturer : Pepperl+Fuchs
Product No. : FI-PFH-NS0137-R
Product Type : HART Termination Board
Connection board for K-System HART Multiplexer16-channel
Relative humidity : 5 ... 90 %, non-condensing
Ambient temperature : 0 ... 55 °C (32 ... 131 °F)
Dimensions : 6.7cm x 12.3cm x 12.6cm
Weight : 0.4 Kg
Shipping Weight : 1.5 Kg
This HART termination board has 16 terminal blocks to connect up to 16 HART field devices.
It has an integrated, switchable 220 load resistor and an integrated ground capacitor. It also has terminal blocks for the 4 mA ... 20 mA signal to the DCS/ PLC.
A 26-pin flat cable K-HM26 is used for connection of each HART Multiplexers KFD*-HM*-16 to the termination board.
HART signal channels (non-intrinsically safe) | ||
---|---|---|
Load resistor | 220 Ω , switchable on | |
Interface | ||
Type | multiplexer connection : IDC plug, 26-pin | |
Signal lines | ||
Rated current | max. 30 mA per channel | |
Indicators/settings | ||
Control elements | DIP switch | |
DIP switch | selection of operating mode: - ON: without load resistor - OFF: with load resistor |
|
Factory setting | DIP switches S1 and S2: ON | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Conformity | ||
Electromagnetic compatibility | NE 21:2017 For further information see system description. |
|
Degree of protection | IEC 60529:2001 | |
Shock resistance | EN 60068-2-27 | |
Vibration resistance | EN 60068-2-6 | |
Ambient conditions | ||
Ambient temperature | 0 ... 50 °C (32 ... 122 °F) | |
Storage temperature | -15 ... 50 °C (5 ... 122 °F) | |
Relative humidity | ≤ 93 % non-condensing | |
Shock resistance | 15 g , 11 ms | |
Vibration resistance | 1 g , 10 ... 150 Hz | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Connection | ||
Field side | screw terminals , green | |
Control side | screw terminals , green HART : 1 x IDC plug, 26-pin |
|
Core cross section | 0.25 ... 1.5 mm2 (24 ... 16 AWG) | |
Material | ||
Housing | PVC | |
Mass | approx. 210 g | |
Dimensions | 110 x 125 x 61 mm (4.3 x 4.9 x 2.4 inch) (W x H x D) | |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
Data for application in connection with hazardous areas | ||
Certificate | PF 11 CERT 1930 X | |
Marking | ![]() |
|
Directive conformity | ||
Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-15:2010 |
· Connection board for K-System HART Multiplexer 16-channel
· Interface for series connection or parallel connection
· Integrated, switchable 220 Ω resistor
· Connection via screw terminals
Best possible prices and delivery time
Long time experience in the field
Well trained staff
Own warehouse facilities
Best relationships with branch office of manufacture
Flexible and individual service for you
Cheap and safe forwarder for shipments (air)
Q: Does your goods are new and original?
A: Yes, they are new and original.
Q: How long warranty?
A: One-year warranty.
Q: Does any certificates can be provided?
A: Yes, it depends on what product you request, please check details with us.
Contact Person: Frank
Tel: +8613823172318