Double-flange differential pressure transmitters are often described as a way to keep pressure out of the instrument. That description is misleading. The diaphragm seal isolates the medium, the heat, the crystallization and the leak path. It does not isolate pressure. Pressure is exactly what must still travel into the measuring cell.
A blocked impulse line on a closed reactor with a crystallizing caustic solution illustrates the point: the vessel needs a level reading, the impulse line needs a reading the hard way, and within days the line plugs. The usual field answer is a double-flange seal assembly, which raises the obvious question of what the isolation layer is actually doing.
Because the fill fluid is essentially incompressible, process pressure reaches the sensing diaphragm with almost no attenuation. What is stopped is matter, heat, phase change and the leak path.
| Layer | What Is Isolated | Practical Consequence |
|---|---|---|
| Media | Corrosive or abrasive process fluid | Corrosion is confined to a selectable, replaceable diaphragm |
| Temperature | High process heat | The head can be mounted away from the hot zone |
| Crystallization | Scaling and plugging in small bores | No impulse legs means no blocked legs |
| Leak and contamination | Toxic, volatile or high-value media | A closed fill circuit has no joints to leak |
| Installation risk | Heat, vibration and corrosion at the tap | Fragile parts move to a serviceable front end |
The technology carries inherent displacement error from diaphragm stiffness and fill volume. In very low differential pressure service, or with very long capillaries, that error becomes a large share of the reading and response lag grows. For clean media at ambient temperature, a direct-mount transmitter is more economical and more accurate.
Great System Industry Co. Ltd has supplied process control instrumentation and electrical equipment since 1998, serving more than 6000 customers with a product range built around application engineering rather than catalog matching.
Double-flange differential pressure transmitters are often described as a way to keep pressure out of the instrument. That description is misleading. The diaphragm seal isolates the medium, the heat, the crystallization and the leak path. It does not isolate pressure. Pressure is exactly what must still travel into the measuring cell.
A blocked impulse line on a closed reactor with a crystallizing caustic solution illustrates the point: the vessel needs a level reading, the impulse line needs a reading the hard way, and within days the line plugs. The usual field answer is a double-flange seal assembly, which raises the obvious question of what the isolation layer is actually doing.
Because the fill fluid is essentially incompressible, process pressure reaches the sensing diaphragm with almost no attenuation. What is stopped is matter, heat, phase change and the leak path.
| Layer | What Is Isolated | Practical Consequence |
|---|---|---|
| Media | Corrosive or abrasive process fluid | Corrosion is confined to a selectable, replaceable diaphragm |
| Temperature | High process heat | The head can be mounted away from the hot zone |
| Crystallization | Scaling and plugging in small bores | No impulse legs means no blocked legs |
| Leak and contamination | Toxic, volatile or high-value media | A closed fill circuit has no joints to leak |
| Installation risk | Heat, vibration and corrosion at the tap | Fragile parts move to a serviceable front end |
The technology carries inherent displacement error from diaphragm stiffness and fill volume. In very low differential pressure service, or with very long capillaries, that error becomes a large share of the reading and response lag grows. For clean media at ambient temperature, a direct-mount transmitter is more economical and more accurate.
Great System Industry Co. Ltd has supplied process control instrumentation and electrical equipment since 1998, serving more than 6000 customers with a product range built around application engineering rather than catalog matching.