E+H Germany product CLS50D-AA1C31 Digital conductivity sensor Indumax conductivity sensor

E+H Germany product CLS50D-AA1C31 Digital conductivity sensor Indumax conductivity sensor

Description:

Manufacturer : Endress+Hauser

Product No. : CLS50-G6C1

Product type : Indumax CLS50Inductive Conductivity Sensor

Version : G = For use in hazardous areas, ATEX II 1G Ex ia IIC T4/T6 Ga

Measuring ranges : Conductivity = 2 µS/cm to 2000 mS/cm (uncompensated), Temperature = -20 to +180 °C (-4 to +350 °F)

Cell constant : k = 1.98 cm–1

Measuring frequency : 2 kHz

Temperature measurement : Pt100 (Class A according to IEC 60751)

Conductivity response time : t95 = 2 s

Ambient temperature range : -10 to +70 °C (+10 to +160 °F)

Storage temperature : -20 to +80 °C (0 to +180 °F)

Degree of protection : IP 68 / NEMA type 6 (sensor in installed state with genuine seal)

Shipping Weight : 1.5 Kg

Additional Informaiton:

Indumax CLS50D is a digital inductive conductivity sensor for standard, hazardous and high-temperature applications. Benefit from high chemical resistance and long durability thanks to robust materials (PFA, PEEK). Moreover, it is insensitive to soiling and performs reliable and repeatable even in harsh and aggressive media. Thanks to Memosens, CLS50D combines maximum process and data integrity with simple operation. It resists corrosion and moisture and facilitates predictive maintenance.

Benefits

High durability and chemical resistance even under harsh conditions

Dirt-repellent materials and large sensor opening avoid soiling

Wide temperature range and highly resistant materials make the sensor suitable for virtual any application

Reliable values thanks to active connection monitoring

Easy wiring over long distances without impact on the measurement accuracy

Logging of sensor-specific data for easy traceability

Approved for hazardous area use

Show less
 

Field of application

Indumax CLS50D measures toroidal conductivity in:

Chemicals:
- Concentration measurement of acids and bases
- Quality monitoring of chemical products in tanks and pipes

Food & Beverages:
- Phase separation of product/product mixtures in pipe systems

Life Sciences:
- Phase separation of product/product mixtures in pipe systems

Wastewater industry:
- Inlet monitoring

With its international explosion protection approvals, such as ATEX, FM, CSA, NEPSI, it is suitable for hazardous areas.

Show less

Features and specifications

Conductivity
Measuring principle
Inductive

Application
Chemical industry, process

Characteristic
Analog or digital, inductive conductivity sensor for standard, Ex and
high-temperature applications

Measurement range
2µS/cm to 2000 mS/cm

Measuring principle
Inductive conductivity measurement

Design

No direct contact with the media because of the sensor coating made of highly resistant material

Material
PEEK or PFA

Dimension
Electrode:
Outside diameter: 47.5 mm (1.87 inch)
Inside diameter: 15 mm (0.59 inch)
Inside diameter (PEEK version): 15.5 mm (0.61 inch)

Process temperature
PEEK: max. 125°C (max. 260 °F)
PFA: max. 110°C (max. 230 °F)

Process pressure
PEEK: max. 21 bar (max. 304.5 psi)
PFA: max. 17 bar (max. 246.5 psi)

Temperature sensor
Integrated Pt1000

Ex certification
ATEX, IECEx, NEPSI, FM, CSA, TIIS, EAC

Connection
Process connection: NPT1", DN50, AINSI, JIScable: fixed cable connection

Ingres protection
IP 68 / NEMA type 6

Additional certifications
Calibration certification of the cell constant

Common Models: