| MOQ: | 1 piece |
| Price: | Negotiable, depends on nominal diameter and configuration |
| Standard Packaging: | Original Endress+Hauser carton with foam protection, export carton for air freight |
| Delivery Period: | 7 to 15 working days after payment |
| Payment Method: | T/T,Western Union,PayPal |
| Supply Capacity: | 50 pieces per month |
The Prosonic Flow W 400 is the high-end clamp-on ultrasonic flowmeter of the Proline family, built for safe, cost-effective and maintenance-free measurement of conductive and non-conductive liquids. Sensors are mounted on the outside of the pipe, so the meter measures flow without opening the line, without interrupting the process and without any pressure loss.
Because the measurement is non-invasive and bidirectional, it works independently of pressure, density and conductivity. That makes the W 400 a practical retrofit solution for existing water, wastewater, process water and hydropower lines where a lined or large-bore pipe cannot be cut.
| Parameter | Specification |
|---|---|
| Measuring principle | Ultrasonic time-of-flight, clamp-on, non-invasive |
| Nominal diameter range | DN 15 to 4000 (1/2 to 160 in) |
| Medium temperature range | -40 to +130 °C (-40 to +266 °F) |
| Ambient temperature range | -40 to +130 °C |
| Measuring range | 0 to 15 m/s (0 to 50 ft/s) |
| Maximum measurement error | ±3% o.r. for DN 15; ±2% o.r. for DN 25 to 200; ±2% o.r. above DN 200 |
| Measured variables | Volume flow, flow velocity, sound velocity |
| Process pressure | Not applicable - the sensor is mounted outside the pipe |
| Sensor materials | Sensor holder, sensor housing and strapping bands in 1.4301 (304) or 1.4404 (316L) |
| Transmitter housing | Polycarbonate or coated AlSi10Mg, wall-mounted remote version |
| Degree of protection | Transmitter IP66/67 Type 4X; sensor IP66/67 Type 4X, IP68 Type 6P optional |
| Display and operation | 4-line backlit display with touch control, configuration via display, web browser or operating tool |
| Outputs | 4-20 mA active; 4-20 mA HART active; two pulse/frequency/switch outputs passive; Modbus RS485 |
| Input | Status input |
| Digital communication | HART, Modbus RS485 |
| Power supply | AC 100 to 240 V, AC/DC 24 V |
| Approvals | cCSAus, CE, C-tick, EAC; metrological verification on accredited ISO/IEC 17025 calibration facilities |
For an in-line flowmeter, cost scales with the pipe diameter: the sensor, the flanges and the installation work all grow. With a clamp-on meter the sensor set is largely independent of pipe size, and no cutting, welding or shutdown is required. From roughly DN 200 upward the difference in total installed cost becomes significant, and it continues to grow toward DN 4000.
Configuration depends on pipe material, pipe dimensions, liner, medium temperature and the output protocol you need. Please send us the pipe outside diameter, wall thickness, material, medium and expected flow range, and we will confirm the matching sensor set, transmitter version and coupling pads.
Great System Industry Co. Ltd has supplied process control instrumentation and electrical equipment since 1998, serving more than 6000 customers worldwide. All instruments are shipped as original factory packages with documentation.
| MOQ: | 1 piece |
| Price: | Negotiable, depends on nominal diameter and configuration |
| Standard Packaging: | Original Endress+Hauser carton with foam protection, export carton for air freight |
| Delivery Period: | 7 to 15 working days after payment |
| Payment Method: | T/T,Western Union,PayPal |
| Supply Capacity: | 50 pieces per month |
The Prosonic Flow W 400 is the high-end clamp-on ultrasonic flowmeter of the Proline family, built for safe, cost-effective and maintenance-free measurement of conductive and non-conductive liquids. Sensors are mounted on the outside of the pipe, so the meter measures flow without opening the line, without interrupting the process and without any pressure loss.
Because the measurement is non-invasive and bidirectional, it works independently of pressure, density and conductivity. That makes the W 400 a practical retrofit solution for existing water, wastewater, process water and hydropower lines where a lined or large-bore pipe cannot be cut.
| Parameter | Specification |
|---|---|
| Measuring principle | Ultrasonic time-of-flight, clamp-on, non-invasive |
| Nominal diameter range | DN 15 to 4000 (1/2 to 160 in) |
| Medium temperature range | -40 to +130 °C (-40 to +266 °F) |
| Ambient temperature range | -40 to +130 °C |
| Measuring range | 0 to 15 m/s (0 to 50 ft/s) |
| Maximum measurement error | ±3% o.r. for DN 15; ±2% o.r. for DN 25 to 200; ±2% o.r. above DN 200 |
| Measured variables | Volume flow, flow velocity, sound velocity |
| Process pressure | Not applicable - the sensor is mounted outside the pipe |
| Sensor materials | Sensor holder, sensor housing and strapping bands in 1.4301 (304) or 1.4404 (316L) |
| Transmitter housing | Polycarbonate or coated AlSi10Mg, wall-mounted remote version |
| Degree of protection | Transmitter IP66/67 Type 4X; sensor IP66/67 Type 4X, IP68 Type 6P optional |
| Display and operation | 4-line backlit display with touch control, configuration via display, web browser or operating tool |
| Outputs | 4-20 mA active; 4-20 mA HART active; two pulse/frequency/switch outputs passive; Modbus RS485 |
| Input | Status input |
| Digital communication | HART, Modbus RS485 |
| Power supply | AC 100 to 240 V, AC/DC 24 V |
| Approvals | cCSAus, CE, C-tick, EAC; metrological verification on accredited ISO/IEC 17025 calibration facilities |
For an in-line flowmeter, cost scales with the pipe diameter: the sensor, the flanges and the installation work all grow. With a clamp-on meter the sensor set is largely independent of pipe size, and no cutting, welding or shutdown is required. From roughly DN 200 upward the difference in total installed cost becomes significant, and it continues to grow toward DN 4000.
Configuration depends on pipe material, pipe dimensions, liner, medium temperature and the output protocol you need. Please send us the pipe outside diameter, wall thickness, material, medium and expected flow range, and we will confirm the matching sensor set, transmitter version and coupling pads.
Great System Industry Co. Ltd has supplied process control instrumentation and electrical equipment since 1998, serving more than 6000 customers worldwide. All instruments are shipped as original factory packages with documentation.